2-Wheeled Cart with 10" Pneumatic Tires
(fits Patriot, AT-50 & AT-250)

(Part# WC2)

Tote your trap wherever you want. Designed to be pulled by an ATV or moved around by hand, the cart is a must for portability! The pneumatic tires provide a soft ride over rough terrain.

• 10" Pneumatic rubber tires with ball-bearing wheels
• Battery box - Group 27 or 29
• Heavy-duty welded steel frame
• Pin-type hitch
• Compatible with Patriot, AT-50 and AT-250
• Optional handle
• Optional 10" run-flat tires

Price:  $240

With Run-Flat Tires:  $290

With Handle:  $275

With Run-Flat Tires & Handle:  $325

2-Wheeled Cart with 16" Run Flat Tires 

(fits Commercial Machines, Hare & Apollo*)

(Part# WC4-16)

This is the bigger Atlas cart. It is made for their larger machines. It's wider than the small cart in order to accommodate the bigger machines. It also comes standard with the larger 16" knobby run-flat tires. The large run-flat tires provide a soft ride over rough terrain without the chance of a flat. These carts are made to be pinned together to tote several at a time.

• Run-Flat tires
• Pin-Type hitch compatible with an ATV
• Heavy-duty welded steel frame
• Compatible with the Hare, RTC, AT-300, AT-400 & Apollo*
• Built-in handle on tongue

*This is also a great option for an AT-50 or AT-250 when you are getting a Tri-Axis Wobble or Wobble machine. It has a much wider wheel base and gives a lot more support when all those motor are all moving at the same time and throwing birds.

Price:  $325

w/ Collapsible Axles:  $359

2-Wheeled Cart Handle

(Part# HANDLE CART)

T-Bar handle for the small Atlas cart for easy transportation.  Works on WC2 cart only.

Price:  $35

2" Receiver Hitch Mounting Bracket

(Part# HITCH MOUNT)

Mount your trap machine directly behind your truck on a hitch mount

Price:  $85

ATA/Oscillating Base for Patriot, AT-50 or AT-250

(Part# BASE ATA)

Increase your skill to a higher level by firing at random targets. Enhance your target presentations with the ATA/oscillating base. Automatically moves side-to-side for a varied target presentation and to simulate ATA trap shooting. Equipped with an on/off toggle switch in case you want to practice a fixed shot.  Upgrade your basic machine to an ATA machine in minutes, very easy to install.

• Oscillates trap side-to-side
• Conforms to ATA standards
• On/Off toggle switch
• Powered by 12 volt battery
• Interrupter available for an additional $275
• Compatible with Patriot, AT50 and AT250

Price:  $449

Add-On Wobble Kit for ATA/Oscillating Base for AT-50 or AT-250

(Part# BASE WOBBLE KIT)

Already have the ATA/Oscillating Base on your machine?  Add this to your existing oscillating base to convert it into the full wobble base.

Price:  $449

Wobble Base for AT-50 or AT-250

(Part# BASE WOBBLE)

Increase your skill to a higher level by firing at random vertical and horizontal targets. Converts your AT-50 or AT-250 into a wobble trap. You'll have full automatic movement from left to right and up and down. A wobble trap will add the element of surprise and make clay shooting more challenging. Its like having 5 traps in one. If you have a basic machine and want a wobble machine, this is what you need.  Easy to install.

• Oscillates trap side-to-side
• Wobbles up and down
• Left/Right angles conform to ATA standards
• On/Off toggle switch for each direction
• Powered by 12 volt battery
• Interrupter available
• Compatible AT-50 and AT-250

Price:  $849

Add-On Tri-Axis Wobble Kit for AT-50 or AT-250

(Part# BASE 3AXIS KIT)

For individuals who already have our wobble base. This tri-axis wobble kit will convert your wobble base to our tri-axis wobble base. The tri-axis wobble base incorporates all the features of our standard wobble platform with the added dimension of tilt. When mounted to this unit, your trap machine will simultaneously and automatically be moving left to right, up and down and tilting left to right for a countless variety of target presentations. With the added component of tilt, curling targets will be a consistent part of the target mix, adding a whole new dimension, and new challenges, to the clay shooting experience.

• Mounts directly to wobble base
• Tilts (canting) left and right for curling targets
• Compatible AT-50 and AT-250
• Powered by 12 volt battery

Price:  $449

Tri-Axis Wobble Base for AT-50 or AT-250

(Part# BASE 3AXIS)

We are proud to present the world's only automated tri-axis wobble base. This one-of-a-kind accessory incorporates all the features of our standard wobble platform with the added dimension of tilt. When mounted to this unit, your trap machine will simultaneously and automatically be moving left to right, up and down and tilting left to right for a countless variety of target presentations. With the added component of tilt, curling targets will be a consistent part of the target mix, adding a whole new dimension, and new challenges, to the clay shooting experience.

• Oscillates trap side-to-side
• Wobbles up and down
• Tilts (canting) left and right for curling targets
• On/Off toggle switch for each direction
• Left/Right angles conform to ATA standards
• Interrupter available
• Compatible with AT-50 and AT-250
• Powered by 12 volt battery

Price:  $1,249

ATA/Oscillating Base for AT-200 or AT-150

(Part# AT200 BASE ATA)

Increase your skill to a higher level by firing at random targets. Enhance your target presentations with the ATA/oscillating base. Automatically moves side-to-side for a varied target presentation and to simulate ATA trap shooting. Equipped with a random movement timer.

Convert your AT-150 or AT-200 Sporter into an ATA trap machine!

• Oscillates trap side-to-side
• Conforms to ATA standards
• On/Off toggle switch
• Powered by 12 volt battery
• Random interrupter timer included
• Compatible with AT-200 Only (or AT-150 models)

Price:  $900

Wobble Base for AT-200 or AT-150

(Part# AT200 BASE WOBBLE)

Increase your skill to a higher level by firing at random vertical and horizontal targets. Converts your AT-200 Sporter to a wobble trap. A wobble trap will add the element of surprise and make clay shooting more challenging. Its like having 5 traps in one.

• Oscillates trap side-to-side
• Wobbles up and down
• Left/Right angles conform to ATA standards
• On/Off toggle switch for each direction
• Powered by 12 volt battery
• Interrupters included
• Fits AT-200 or AT-150 only

Price:  $1,200

Tri-Axis Wobble Base for AT-200 or AT-150

(Part# AT200 BASE 3AXIS)

The world's only 3-axis wobble base. Incorporates all the features of our wobble base plus adds a new dimension of automatic tilt. The 3-axis wobble base moves left/right, up/down and tilts left/right simultaneously. The tilt feature is completely automated and allows the trap to throw curling targets while moving side-to-side and up and down. Which adds a whole new dimension to shooting. Compatible with AT-200 or AT-150 only.

• Oscillates trap side-to-side
• Wobbles up and down
• Tilts (canting) left and right for curling targets
• Independent On/Off toggle switches for each movement
• Powered by 12 volt battery
• Interrupters included
• Left/Right angles conform to ATA standards

Price:  $2,499

Manual Tilt Base for Patriot, AT-50 or AT-250

(Part# BASE TILT)

Equally tilt trap left or right 30 degrees for curling targets. Compatible with Patriot, AT50 and AT250.

Price:  $75

Extended Magazine Kit for Patriot or AT-50

(Part# MAG EXTENSION)

The magazine extension kit gives you 20 extra clay targets so you can spend more time shooting and less time reloading. It increases your Atlas Trap capacity from 50 to 70 clay targets and is compatible with the Patriot and AT-50.

Price:  $49

Interrupter

(Part# INTERRUPTER)

Used in competition ATA trap shooting, the interrupter will randomly interrupt the side-to-side pattern of oscillation for a completely random target presentation that is impossible to anticipate. The interrupter will conserve battery usage by not allowing the ATA base to run for more than 6 seconds. This item can be added to the ATA and wobble bases. The wobble base can use just 1 interrupter or add 2 interrupters for more random presentations. The interrupter is already included in the ATA AT-400 and AT-400 wobble trap.

Price:  $275

Magazine cover for AT-250 or AT-400

(Part# MAG COVER AT250 or MAG COVER AT400)

Keep your clays dry and protect them from shot with the hard plastic magazine cover. The color is light gray so it won't attract heat and melt your clays. Fits directly over magazine. A must for rainy climates.

Price:  $95

Soft Cover for all Atlas Traps

(Part# SOFT COVER)

Protect your Atlas trap with our water-proof and sweat-proof cover. Fits all traps and has a bungee cord drawstring at the bottom

Price:  $95

Silver Spring

(Part# SILVER SPRING)

The Silver Spring is designed specifically for AT 250, AT 400, RBT, and T/C units. It replaces the Blue Spring on existing units. The Silver Spring cannot be used with the AT 50 or Patriot units. It cannot be used with AT 250's that currently use the Gray Spring.

Price:  $25