300E Models
We are pleased to offer a selection of MEC 300E Sporter Trap Machines
|
 |
|
(Shown with optional MEC T-Cart) |
The 300E Sporter is a midlevel club sporting clay target machine. The 300E Sporter is made in the USA and manufactured from heavy duty steel and stainless steel materials. It includes a tilt base which allows for setting creative target presentations unheard of at this price point. Quick and easy setup is achieved in seconds with MEC's "no wrench" adjustment for elevation and tilt.
- Holds 300 standard targets. Midi carousel available in place of standard carousel at no extra charge.
- Throwing distance up to 110 yards.
- Cycle time: 1.5 seconds
- Tilts back to 70 degrees, great for teal target presentations.
- Tilts left and right up to 40 degrees either side of vertical to throw curling/looping targets.
- Elevation and tilt quickly and easily adjusted without the need for wrenches.
- Life-time warranty on main-shaft and one-way bearing.
- Three year warranty for everything else
- Release Cord sold separately
- 100' Release Cord - Part# 120000011
- 300E Sporter (108mm) - Model# 120300E1
- 300E Midi (90mm) - Model# 120300E2
- 300E Sporter LH (108mm) - Model# 120300EL1
- 300E Midi LH (90mm) - Model# 120300EL2
|
Sporter or Midi: $2,700
Left Hand Sporter or Midi: $2,800 |
 |
|
(Shown with optional MEC T-Cart) |
The 300E Battue is a midlevel club sporting clay target machine made in the USA and manufactured with heavy duty steel and stainless steel materials. The tilt base allows for a variety of target presentations. The Battue target is the same diameter as a standard 108mm target but is much thinner and more aerodynamic. A lot of folks consider this a "duck" target as it somewhat simulates how a duck lands.
The 300E Rabbue specialty machine gives shooters a unique target presentation by launching a rabbit target horizontally as opposed to vertically.
- Holds 300 battue targets.
- Throwing distance up to 110 yards.
- Cycle time: 1.5 seconds
- Tilts back to 60 degrees.
- Tilts left and right up to 30 degrees either side of vertical to throw more target variations.
- Life-time warranty on main-shaft and one-way bearing.
- Three year warranty for everything else
- Release Cord sold separately
- 100' Release Cord - Part# 120000011
- 300E Battue - Model# 120300E4
- 300E Rabbue - Model# 120300ERABBUE
|
|
|
 |
|
(Shown with optional MEC T-Cart with 10" wheels - additional $195) |
The 300E Mini is a midlevel club sporting clay target machine. This machine is made in the USA and manufactured from heavy duty steel and stainless steel materials. It includes a clay locating mechanism so the machine throws accurate target presentations normally unheard of when throwing Mini targets. Quick and easy setup is achieved in seconds with our “no wrench” adjustment for elevation and tilt.
- Holds 300 Mini (60mm) targets.
- Clay locating mechanism on throwing plate ensures accurate targets every time.
- Throwing distance up to 110 yards.
- Cycle time of 1.5 seconds.
- Tilts back to 60 degrees, great for Teal target presentations.
- Tilts left and right up to 30 degrees either side of vertical to throw curling targets.
- Elevation and Tilt quickly and easily adjusted without need for wrenches.
- Three-year warranty and life-time warranty on main-shaft and one-way bearing.
- 300E Mini - Model# 120300E3
- 300E Pro 70 - Model# 120300E7
|
|
|
 |
|
|
|
The 300E Chandelle is MEC's midlevel club clay target machine for throwing Rabbit or Standard targets. The 300E Chandelle is made in the USA and manufactured with heavy duty steel and stainless steel materials. The Tilt base allows for a variety of target presentations and the machine comes with a three year warranty. The first year is Parts & Labor with the remaining 2 years Parts.
- Holds 300 standard targets
- Midi or Pro 70 versions available in place of standard carousel at no extra charge
- Genuine 100 yard throwing distance
- Cycle time of 1.5 seconds
- Tilts forward 45 degrees to throw Rabbit targets along the ground, standard targets along the ground or just above if the terrain is too rocky
- Tilts back to up to 45 degrees to throw a true Chandelle presentation or straight up vertical Teal targets
- Tilts up to 35 degrees left and 25 degrees right (when viewed from behind) to add curl to any target presentation and allow the user to throw Standard targets that will land upside down
- Three-year warranty: 1st Year Parts & Labor, Remaining 2 Parts and life-time warranty on main-shaft and one-way bearing
- The standard Chandelle and Rabbit versions of this machine can be converted back and forth to throw standard targets in Teal/Chandelle presentations or to throw rabbit targets in Rabbit presentations
- 300E Chandelle - Model# 120300EC1
- 300E Rabbit - Model# 120300ER1
- 300E Chandelle Midi - Model# 120300EC2
- 300E Chandelle Pro 70 - Model# 120300EC7
|
|
|
 |
|
(Shown with MEC display box; not included) |
The 300E ATA Trap is a midlevel ATA clay target machine made in the USA and manufactured from heavy duty steel and stainless steel materials. It also includes a built in timer/interrupter to randomly stop and start the oscillation motor to prevent the shooter from "reading" the target.
- Holds 300 standard targets in an 8 column carousel.
- Machine height is 36 1/2" when elevated.
- Cycle time: 1.5 seconds
- Locking lever and turnbuckle adjustment for elevation.
- Oscillates left to right to throw correct ATA angles with adjustment for fine tuning
- Locking lever and turnbuckle adjustment for tilt.
- Has a built in timer/interrupter to prevent shooter from "reading" the target.
- Life-time warranty on main-shaft and one-way bearing.
- Three year warranty for everything else
- Release Cord sold separately
- 100' Release Cord - Part# 120000011
- 110v Options Available
- 300E ATA Trap - Model# 120300EA1
|
|
|
 |
|
(Shown with optional MEC T-Cart) |
The 300E Sporter Wobble is a midlevel sporting clay target machine made in the USA and manufactured from heavy duty steel and stainless steel materials. It also includes a built in timer/interrupter to shut the oscillation motors down when not in use to preserve the battery.
- Holds 300 standard targets
- Midi carousel available in place of standard carousel at no extra charge
- Throwing distance up to 110 yards
- Cycle time: 1.5 seconds
- Oscillates up and down between 10-50 degrees in elevation
- Oscillates side to side between 36 degrees minimum up to 80 degrees maximum rotation
- Locking lever and turnbuckle adjustment for tilt
- Has a built in timer/interrupter to prevent shooter from "reading" the target
- Life-time warranty on main-shaft and one-way bearing
- Three year warranty for everything else
- Release Cord sold separately
- 100' Release Cord - Part# 120000011
- 110v Options Available using 100 Amp Power Inverter
- 300E Wobble - Model# 120300EW1
- 300E Wobble Midi - Model# 120300EW2
|
|
|
 |
|
(Shown with MEC display box, not included; Only 1 machine shown, but 2 come with the Skeet Set) |
The 300E Skeet Set includes two trap machines and a skeet release cord. It is the ideal medium capacity skeet set for those on a budget. It comes with all of the features found on much higher priced machines; features that are required by range owners to make setup and adjustment quick and easy, without the need for wrenches.
- Holds 300 standard targets per machine
- Clay locating mechanism on throwing plate ensures accurate targets every time
- Cycle time: 1.5 seconds
- Turnbuckle adjustment for side to side movement, no wrenches required
- Turnbuckle adjustment for elevation, no wrenches required
- Turnbuckle adjustment for tilt to provide super straight targets with no curl
- Instant release without the need for solenoids, keeps mechanism simple
- Life-time warranty on main-shaft and one-way bearing
- Three year warranty for everything else
- 110v Options Available using 100 Amp Power Inverters
- 300E Skeet Set - Model# 120300ESK
- DOES NOT INCLUDE RELEASE CORD OR FIELD WIRING OR WIRELESS RELEASE
|
|
|
 |
|
|
|
The MEC Bunker clay target machine is made in the USA and manufactured from heavy duty steel and stainless steel materials. Quick and easy setup is achieved in seconds with our "no wrench" adjustment for elevation and tilt.
- Cycle time of 1.5 seconds
- Locking lever and turnbuckle adjustment for elevation
- Locking lever and turnbuckle adjustment for tilt
- 110v option available
- Three-year warranty and life-time warranty on main-shaft and one-way bearing
- Uses 12V Deep Cycle Marine Grade Battery, Group 24 Minimum. (not included)
|
|
|
|
